DIY Success - Installing Your New Shower Unit The Right Way

Free Estimates



We have noticed this post relating to Simple ways to Install a Shower Cubicle on Your Own below on the web and felt it made perfect sense to relate it with you over here.


How to Install a Direct-to-Stud Shower Enclosure
A successful shower setup requires careful planning and a great deal of job. Most of the times, you will certainly need to do three types of tasks: mounting wall surfaces, setting up the plumbing, as well as completing walls.

Different Sorts Of Shower Units


  • Push-on Mixer: The tube as well as spray parts of the push-on mixer shower system can be connected to the bath faucet based on your demand, as well as the water temperature can be readjusted using the faucets. Push-on mixers are cheap as well as incredibly simple to mount. Nonetheless, although the hose pipe connection is simple, it is conveniently removed. Furthermore, it is inconvenient to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe and spray of this sort of shower are integrated with a bath mixer tap, and also the temperature can be adjusted via the bathroom taps. It is a really affordable choice and no added plumbing is included. However, the bath/shower mixers additionally struggle with inconvenient temperature level control choices.

  • Manual Mixer: The pipe and spray of a hand-operated mixer shower system are a part of the wall surface unit and also the hot and cold water supplies are linked to a solitary valve The temperature level and stress of the water are regulated with either one or a selection of knobs (in a lot more expensive showers). Although temperature level control is much easier in hand-operated mixer kinds, they are more costly than the formerly discussed mixers. They likewise call for additional plumbing of cold and hot water supply pipes.

  • Thermostatic Mixer: The tube and also spray of this shower type belong of the wall surface system as well as the cold and hot water supplies are linked to a solitary valve right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being also hot. One of the greatest benefits of a thermostatic mixer shower kind includes practical temperature level control. Nonetheless, it is the most expensive of the various mixer alternatives.

  • Power Shower: A power shower is a solitary device containing a powerful electric pump that can modifying both the water stress and temperature. This kind of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the modification of both stress and also temperature level easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is provided by a mix central heating boiler under keys stress.

  • Electric Shower: An electric shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is important to note that for this shower type to be installed, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they continue to be untouched by various other faucets in other places in operation within the family. A significant downside of electrical showers is that the control handle just enables the choice of high temperatures at less pressure, or lower temperatures at a greater pressure. This is bothersome in the winter when the spray is usually weak and also the mains water is colder. However, this problem is tackled in some versions which are readily available with a winter/summer setup.


  • A Lot Of Typical Errors


  • Breaking or disregarding local code constraints.

  • Making use of pipelines that are as well small.

  • Attaching copper to galvanized without making use of a brass or dielectric suitable in between the two.

  • Not using tape or pipeline substance at threaded joints.

  • Uneven your fixtures when installing them.

  • Not mounting an air void filling up for fixtures.

  • Reducing supply stub outs also short to install the shutoff valves onto after the finished wall surface remains in place.

  • Not properly straightening tubes into installations or quit valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will create a leakage.).

  • When turning the water back on in your house, constantly run the outside tube shutoff or flush your commodes to hemorrhage dirt and also air from the lines. This particles can cause troubles in your sink taps and various other plumbing trim.


  • Prep work.


    Firstly, you have to select the type of shower that you desire to set up. It is important to identify whether the chosen shower can handling certain systems and also can regulate a secure level of water via the central heating boiler. Most shower devices nowadays are designed to be adaptable to various water stress (such as stored warm water and chilly mains).
    It is likewise important to think about the water pressure as well as the planning of the piping as well as drainage for the shower.

    Technique.


    Depending on the kind of shower you wish to set up, the shower head have to either be fitted in order to prevent its contact with the water in the bath listed below or the base tray, or it must have a check shutoff.
    Prior to starting, it is suggested to mark the placements of the shower head and control, as well as to plan the pipe-work included. In addition, the drainage system to eliminate the drainage will require to be planned. Both settings of the wire route as well as the shower button will likewise require to be considered if an immediate or electric shower system is being mounted.
    Make use of the instruction overview given with the shower unit to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is important to cut off the water system. In order to shield the pipes, they ought to be provided a water-proof covering and likewise fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also plastered over to neaten the general look.
    Fit the base tray, shower head, and also installations.
    Connect the main shower control to the pipes that will certainly be providing the water (This might require a female screw thread adapter).
    Reconnect the water system and also examination the pipelines for any leaks, as some may need tightening up.
    If you are mounting an electric shower, bear in mind to switch off the electricity supply before making any kind of electric links. As soon as these connections have been made (there should be assistance within the instruction manual), the power supply can be changed back on.

    Changing Water Stress to Fit Your Shower.


    The cold water storage tank can be raised to a better elevation (occasionally just 150mm (6inches)) by installation a solid wood assistance under it - perhaps made up of struts and also blockboards. If you pick this alternative, the major and also circulation pipelines will certainly likewise need to be increased to satisfy the new height of the reservoir.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached right into the power supply in order to run.

    Piping and also Drain.


    It is best to utilize 15mm diameter supply pipes, and also make the go to the shower as brief as well as straight as possible so as to maintain optimal stress as well as minimise heat loss. Additionally, by minimising making use of joints for pipeline corners, you can decrease the resistance in the circulation of the water. You can accomplish this by bending the pipes rather.

    Most Popular Shower Enclosure Options to Upgrade Your Bathroom


    Frameless Shower Enclosures


    Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.



    Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.


    In-line Shower Options


    Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.



    You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.


    Semi-Frameless Shower Enclosures


    The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.



    Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.



    You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.


    Glass Block Shower Enclosure


    If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.



    You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.



    Final Thoughts



    Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

    https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


    How to Install a Direct-to-Stud Shower Enclosure

    I'm just very excited about Simple ways to Install a Shower Cubicle on Your Own and I'm hoping you appreciated my entry. Sharing is good. You never know, you may be helping someone out. Many thanks for taking the time to read it.




    Schedule And Pricing


    Leave a Reply

    Your email address will not be published. Required fields are marked *